| |
|
| |
|
| |
|
| |
1. Lay machine back. Exposing the under side. |
2. Align the notches in the clutch plate with the lugs. |
3. Insert lugs into clutch plate and turn counter clockwise until the clutch plate touch to stoppers. To install pad, ensure pad is centered on pad driver. |
4. Carefully unwrap power cord and check for tangles and knots plug into a properly ground outlet. |
| 5. Pull up on the handle clamp knob to unlock handle, adjust handle to the comfortable position (Generally, at the top of the thigh) Screw the knob to lock handle in place. |
| 6. Place both hands on the operator handle, place the left forefinger of the safety switch and press. Now, machine is ready to operate. (To unplug, grasp the plug, Not the cord) |
2008 Thanakit KarnChang. All rights Reserved.