| |
|
| |
|
| |
|
| |
1.Lay machine back. Exposing the under side. |
| 2.To install pad, ensure pad is centered on pad driver. Aling clutch plate and screw it until it is tight. |
3.Raise the machine up and adjust the level of polishing by screw the knot at the top end of the body
|
| 4.During adjust level, use another hand rotate the pad a bit until it touch on the floor. It shold not touch on the floortoo much. |
| 5.Unlock the knob to adjust handle to the comfortable position (Generally, at the top of the thigh) Then screw the knob to lock handle in place. |
| 6.Carefully unwrap power cord and check for tangles and knots plug into a properly ground outlet. You should lift it up a bit before start run for life time expanding. |
| |
| 8.การปัดเงาให้ดันเครื่องไปข้างหน้า และฉีดน้ำยาปัดเงาพื้น ก็จะได้พื้นสวยเงางาม |
2008 Thanakit KarnChang. All rights Reserved.